|
PROJECTION PUMP
BM300
MAIN CHARACTERISTICS
Sturdy built, using black metal sheet with 3-8 mm thicknesses.
Double mixer equipped, since it incorporates a second axis fitted with blades which hold the material, allowing for a greater homogenization and also allowing for a necessary resting time so the additives react before being applied to the walls, avoiding at the same time the arid decantation if they are kept still. |
(Click on the picture to enlarge it full-screen
)
|
|
A possibility to be able to install any hose or conveyor screw available in the market at any time, which allows us to provide flows from 1L to 120L min.
Machine cleaning without having to disassemble the hose/conveyor screw, since it incorporates an easy opening valve on the material receipting hopper.
A complete impossibility for the material situated in the receipting hopper to get in contact with ball bearings or with the driving group itself.
Protection grids to avoid trappings, both if we are working with sack mixer feeding, or if it is placed under a silo.
Driving group largely dimensioned, equipped with a reducer, with a 5.5 Kw. engine.
Transmission to the second mixing axis by means of chain and pinions.
High quality electrical panel fitted with a general differential, protection for the pump engine and for the rest of components which might be associated with it (compressor, mixer, foam generator and automatisms)
In order to disassemble the panel more easily in case of fault, all the elements, are connected to it by means of independent cases.
Manual transport system by means of handles and two king size pneumatic wheels.
Finished in furnace dried paint.
Supplied with instruction manual, spares and guarantee.
CE certificates included.
|
